CO2 Inflator Kit with 5 X 16g CO2 Threaded Cartridges- Presta & Schrader Valve Compatible -Portable CO2 Bike Tire Pump Come with Glueles Repair Kit for Road & Mountain Bike

Product Description

Features:

Made from 100% recycled steel.Zinc coating prevents rust on the charger.Disposable (Note: Only dispose of empty cartridges)Fits most standard 3/8″ threaded CO2 bike inflator heads.Threaded, non-refillableThey have 16 grams of CO2 inside them, which means they weigh 59 grams when full and 43 grams when empty.

Threaded CO2 Cartridges

Compatible for All Threaded CO2 Inflators

Our 3/8-24 sized threads are compatible with all threaded CO2 bike tire inflators.

Note: Once the CO2 is released, the cartridge and inflator head will get extremely cold, so it pays to wear gloves or buy CO2 cartridges with protective sleeves to protect your hands.
CO2 Inflator 16g Threaded CO2 Cartridge Bike Tire Repair Kit Caution: Contents under pressure. Do not puncture or heat above 1200F/490C. Do not inhale or discharge towards face or body. Keep cartridge out of reach of children. Carbon Dioxide/CO2 UN1013

Bike Tire Levers

Our incredible high strength and durable engineered plastic tire levers are a must need for any cyclists or bikers saddlebag/rucksack.

Metal Rasp

Use the metal rasp to roughen up the inner tube. This helps the patch stick to the inner tube.

Round Punch

Add the patch, remove the plastic from the back then add to the punctured inner tube. Hold down tightly for around 60 seconds, you can use your fingernail to ensure the patch is stuck down around every edge.

STEP 2

Slide foam sleeve over CO2 cartridge.

STEP 2

Thread cartridge clockwise into inflator head.

STEP 3

Thread the 2 in 1 valve head deeply onto the Presta or Schrader tire valve.

STEP 4

Slowly ture the lever counter-clockwise to release CO2 gas, up to a 45 degree angle.

STEP 1

STEP 2

STEP 3

STEP 4

EVERYTHING YOU NEED FOR A FLAT– The CO2 Tire Inflation Kit gets you back on the road quicker by including solutions for all of you flat tire needs. Bike Tire Repair Set includes: 16g CO2 cartridges x 5, CO2 inflator X1, insulate sleeve X1, tire levers X 3, Bicycle Multitool X1
GET BACK RIDING FAST– Use your tire levers, Take the tire out of the bead, Locate where the air is escaping from. Use metal rasp tool to rough up the area around the puncture so that your adhesives have something to grip. Then press glueless punch firmly over the hole.
SUPER COMPACT AND LIGHTWEIGHT– CO2 Inflator fit Presta & Schrader valve, and CO2 cartridges are smaller and lighter than a hand pump, easily fitting into a saddle bag or jersey pocket. The cartridges are full of compressed air and can inflate flat tire in a matter of seconds with little effort.
PERFECT FOR ROAD/ MOUNTAIN BIKE TIRES– 16 gram cartridge inflates a road tire to 100 psi and a MTB tire to approx. 40psi. NOTE: CO2 gas is ‘not’ food grade. As this cartridge dispenses its air, it rapidly cools and becomes COLD to the touch; care should be taken, protect your hands when dispensing air. IMPORTANT: For safety reasons – do NOT screw in and store a CO2 cartridge into an inflator head until needed for operation. Care & respect should be taken when using CO2 gas
WARNING– Never store the cartridges in or near any hot place, such as under direct sunshine, near a heat source or left in a car. Never use low quality CO2 head. Make sure the device has fully punctured the head of the cartridge. If not, or you find that the gas being released very slowly or the gas is freezing the head, discharge the gas for a few minutes until the bottle is fully empty, then dispose of properly.